How To Ensure Your Drain Remains Flowing?

blocked drains in Sutherland Shire

blocked drains in Sutherland Shire

If you have a drain, then you have experienced drain blockage or clogging. Although the reason behind the blockage can be as simple as grease, food, dirt, soap, scum, or your hair, the reasons list goes on. When accumulated in the pipes, these simple and small things become a big issue.

When the blockage happens, you can do a few things before calling a professional. Most of the time, the clogged drains can easily be removed with small steps you can take. Here are the five methods by which you can ensure the flow of your gutters works smoothly, steps you can take regularly.

5 Methods to Ensure Drain remains Flowing

To make the drain flow, you need to remove the things which got inside and stuck on blocked drains in Sutherland Shire. You can take the following steps.

  • Use Plunger

A plunger is the most common and the first thing you should use. A plunger works with the upstrokes or downstrokes. It is used to create pressure on the clog. With the continuous strokes of the plunger, the clog usually gets removed from the pipe.    

  • Drain Snake

The drain snakes would be another option if your plunger were not successfully removing the dirt stuck in the pipe. As the name suggests, it’s pretty like a snake. The usage of the drain snake is common on blocked drains in Sutherland shire as they come in different ways, like there are manual, electric, automatic, and hybrid manual and electric drain snakes.

  • Use Vinegar And Baking Soda

Baking soda and vinegar can do more than cooking; they are also helpful when removing the clog. The usage of vinegar and baking soda is for the clog, which is not very rigid. Before pouring them, pour some hot water and then baking soda and vinegar with hot water. You need to wait for at least 1 hour to get the best results.

  • Vacuum  

The usage of a vacuum in drains is for the removal of any dry or wet dirt. The vacuum sucks out all the dirt and dust stuck on your pipes, whether wet or dry. In the usage, you need to leave the vacuum on the opening of your drain and let it work for 2 minutes. After that, vacuum and check if it has worked for you or not. 

  • Plumber

You must have been trying out all the methods, or you could not find where there is a problem with your pipes. Then it is better to call a professional plumber to tell you what is wrong and what needs to happen. Instead of trying hard on your pipe, which might end up damaging it more, it is better to call a plumber.

The Bottom Line 

The blockers on drains are a prevalent thing that happens over a period of time. It can turn out to be a big problem if not taken care of. Asset Plumber Group is helping people with plumber services to clean out any clogs from your drains.

Related posts